Water Rings? No Problem! | Slipcovered Grey Water Rings? No Problem! - Slipcovered Grey

Water Rings? No Problem!

This is the closest thing to MAGIC! 
I was shopping at an estate sale a couple of weeks ago.  
 (Spent way too much money, but anyway…) 
I noticed a coffee table I had to have. 
When I worked for Shelley and Gary at Baker Court Interiors, they would always take a trip to Europe to find amazing pieces for their clients.  I always dreamed of owning one of those unique pieces.   
Well, I found it, and this time it was in my price range, and I didn’t have to travel to Europe to find it!  Although, traveling to Europe would be nice too. 

Only problem,  
Water rings all over it!   
WHAT?   
My first thought was, how could you put glasses on this table?  
 The condensation destroys beautiful wood!  
 Soooo… I was the first at this estate sale and thought, if I don’t buy it someone else will.  If I can’t get out the table full of rings, I will paint it etc…
After a little research,
I was able to get every water ring out of the surface of this table. 
AMAZING!
Here is what I did…
I first took a picture… I wanted to make sure I could see a difference…

Here is the before…  I only took pictures of the rings, I wish I would have taken a picture of the whole table, they were everywhere.

I used a warm iron and a cotton dish towel. 

The condensation is in the grain of the wood, so if a warm iron is placed on top of the cotton dish towel, the grain separates and lifts the water into the towel.  

 I know, seems too hard to believe!
I ironed and kept moving the iron in fear of burning the wood.  After awhile, I was holding it over the rings for 20 seconds or so.  Then peeled off the cotton towel, and like magic, the ring was gone!

Here is the after picture…  

There is one mark I couldn’t remove, it’s dark, so I think it must be a previous burn mark.  I will have to keep working on that one.  
 With a little stain to unify the look, this baby will be as good as new!  
A little elbow grease and look at it!   
YES! 
I love when things work out.  It was super easy too!
Enjoy!
Angie


*Disclaimer – this worked for me, not sure how it will work with different kinds of wood or what kind of damage may occur.  If you try this at home, please use caution and follow at your own risk.*
Previous Post Next Post

4 Comments

  • Dee

    Thank you so much for sharing your water ring magic. Who knew it could be that easy! Love your blog. Dee

    January 7, 2012 at 5:46 pm Reply
  • Betsy@ coastal-colors

    I never knew this! I have heard of using mayo, but never tried it. This looks so much easier! Great tip!

    January 7, 2012 at 9:31 pm Reply
  • Anonymous

    Denatured alcohol worked for me. You put some on a rag and it does the same thing… Causes the water to evaporate that is stuck under your finish.

    February 1, 2012 at 9:26 pm Reply
  • Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    You may also like